123-hp-setup-1018

123 HP SETUP 1018

123.hp.com/dj1018

Unload the HP Deskjet 1018 printer from the shipment box

  1. Acquire simple procedures to unpack and setup the corresponding printer from the box. Prep your printer ready to print the desired document.
  2. Take out the new printer from the shipment box and remove all the tapes from it.
  3. Verify whether all the plastic tapes are all removed from the printer’s control panel display, and in the printer’s inside portion.
  4. Once you are done with the above procedure, take off the duplexer from the box, and then unwrap all the packing materials from it.
  5. Mount the duplexer in the printer. Ensure that you place the duplexer in the proper position.
  6. Turn the 123.HP.Com Setup 1018 printer in such a way that the printer front portion faces you after the installation process.
  7. Link the printer through the power cord to the electrical outlet and switch on the printer.
  8. Connect the one end of the power cord to the printer posterior side while the other end is to be linked with the electrical wall socket.
  9. Power on your printer and setup all the necessary settings on the printer’s control panel.
  10. Load the paper into the feeder tray. Be cautious when you load the paper into the tray.
  11. Place the ink cartridge into its slot so that the print job can be commenced.
  12. It is impossible to operate the printer without software installation.
  13. Use the instructions displayed on the screen to install the 123.HP.Com Setup 1018 printer software.

USB Printer setup for Windows

Configure the printer for a USB cable connection to a computer which is running on a Windows operating system. Obtain the full feature from a USB connected printer and you can configure the full feature printer driver.

  • Prior to setup, ratify that you delete any previously installed printer version.
  • Power on the printer. Disconnect the printer’s USB cable from the computer. Do not connect the cable until it is instructed during the installation.
  • Go to the Devices and Printers window, and then continue with the next step.
  • Download and install the HP Easy Start, it depends on the printer model you are using.
  • Enter your printer model number, download and install the corresponding 123.HP.Com Setup 1018 printer driver. Choose the connection type as USB.
  • In case the download is not successful, follow the guides to install the driver.
  • Get directed to our website and go to Software and Driver Downloads option, and then verify that the operating system you were chosen is correct.
  • Select the Download option, and then proceed with the instructions to use the HP Download and Install Assistant.
  • Choose the printer connection type as USB and go along with the instructions to complete the 123.HP.Com Setup 1018.
  • Make your printer to print or Scan based on the functionality you want to perform.

USB printer setup for Mac device

Make use of the procedure to setup your printer for a USB connection to a Mac device. Obtain the most compatible features from a USB connected printer, after installing the full feature printer driver.

  • Turn on the 123.HP.Com Setup 1018 printer. Your printer might fail to get sufficient power supply if you are using a USB hub or a docking station.
  • The USB cable must be detected from the computer. Wait before you reconnect the cable until it is directed at the time of driver installation.
  • Visit our website, enter your printer model and click on the Begin option. Download and setup the HP Easy Start app.
  • In case the HP Easy Start fails to download, follow the instructions provided to set up the driver.
  • Get directed to our website, click Software and Driver Downloads, enter your printer model and then verify that you have chosen the suitable operating system.
  • Go to HP dj1018 printer driver installation software and click Download and then open the HP Easy Start file or the HP .dmg file in the download folder.
  • Ensure that you have activated the full feature Scan functionality if the printer has a scanner. Select the Add Printer option to create a new print queue. The Add window gets screened.
  • Select the printer name, click on the Use or Print Using option, and then choose the Add option.
  • Go back to the HP installer to end the installation process successfully.
  • Make your printer Print, Scan or Copy, according to the printer functionality.

Wireless Printer setup for Mac device

  • Prior to start the printer setup on the wireless network, collect the requirements and then confirm the printer and computer connection.
  • Connect a USB cable to transfer the wireless setting to the printer.
  • Turn on the router and the computer. Ensure that the printer and the system are linked to the same wireless network.
  • Position the 123.HP.Com Setup 1018 printer and the computer closer to the router during the setup.
  • Unplug the USB cable from the printer and turn on the printer.
  • Visit our website, and select the Software and Driver Downloads option.
  • Select the Download option. Open downloads folder and then go to the HP Easy Start file or the full feature driver .dmg file to start the installation process.
  • Choose Add Printer to start a print queue on the Mac device. Click the printer nameà Use or Print Usingà
  • Go back to the HP installer to finish the installation process.

Set up the printer on a wireless network for Windows

Use the procedure to configure your wireless capable 123.HP.Com/dj1018 printer on a local wireless network.

  • Before configuring the printer on the wireless network, acquire the network name and password, and then verify that the router, printer and system are powered on.
  • Connect the printer and the computer to the same wireless network. Place the printer and the router at a closer distance within the range during the setup process.
  • Disconnect any USB or Ethernet cable from the 123.HP.Com Setup 1018 printer.
  • On the printer’s control panel, choose the Wireless icon. The Wireless Summary screen gets displayed.
  • Select the Settings icon, choose the Wireless Settings.
  • Select Wireless Setup Wizard, and then make use of the instructions to connect the printer to the wireless network.
  • If the printer is connected to the computer via a USB cable, disconnect the cable from the printer.
  • Go to our website and then click Software and Driver Downloads.
  • Click Download which is next to the full feature driver, or choose Basic Drivers for other driver options.

Disclaimer

123hp.co is an independent website that provides support information for HP printer issues. The website does not have specific association with “HP” or its services. All information and images furnished on this website are for informational purpose only. We do not sell products or services of HP in any form. We do not provide any warranty or services associated with the manufacturer. You should approach the manufacturer for the same. Users are advised to review our privacy policy before using our website.

Was This Page Informative?
[Total: 0 Average: 0]