123.HP.Com dj1112

HP Deskjet 1112 Setup

Specifications

Print the documents you require in a snap. Designed to fit in tight spaces and budgets, this printer is meek to set up and use right out of the box. Count on high-quality prints while also saving energy with a 123.HP.Com dj1112 printer that’s ENERGY STAR® qualified.

  • Printing made modest.
  • Designed to fit your life.
  • Inexpensive at-home printing.
  • Eases your impact.
123.hp.com dj1112

Features

  • Paper capacity: 60 sheets
  • Maximum print resolution: 4800 x 1200 dpi
  • Straight-through paper path
  • Simple, twin-cartridge maintenance

Pros

  • Great printing production.
  • USB port.
  • CIS scanning technology.
  • Decent printing speed.
  • High print yield.

Cons

  • Not a lot of connectivity options are accessible.
  • It only prints and does not copy or scan.
  • The ink cartridges is a little hard to snap in.
  • The printer is a bit loud.

Bottom line

HP Deskjet 1112 Printer is mainly intended to fit well into your budget and space . This heavy-duty AIO printer is hassle-free to install and cool to use. The HP software when installed provides grander and excellent prints and protect your cash by saving power. This printer is available at a low price online.

First-time 123.HP.Com dj1112 Printer setup

To set up your printer initially, eliminate all packing materials, link the power cord, mount the ink cartridges, and then mount paper in the input tray.

Unbox the printer from the box

Eliminate the printer from the box, and then eliminate all tape, stickers, and packing materials from the printer.

  • Eliminate the 123.HP.Com dj1112 printer from the box.
  • Eliminate all tape and packing materials from the outside of the printer.
  • Shut the output tray.
  • Reach inside the printer, grip the handle, and then shut the ink cartridge access door.
  • Eliminate all tape and packing materials from inside the printer.
  • Lower the ink cartridge access door.
  • Ensure that you eliminate all hardware and materials from the box before you remove or reprocess the box and packing materials.

Link the power cord and then switch on the printer

Join the printer into a power socket to switch on the printer.

  • Link the power cord to the back of the printer, and then join the other end of the power cord into an electrical socket.
  • Switch on the Power button to turn on the printer.

Mount the ink cartridges

Mount the HP ink cartridges that were sent in the box with your 123.HP.Com dj1112  printer.

  • Grip the handle and expose the ink cartridge access door to open it.
  • The carriage moves to the middle of the printer.
  • Wait until the printer is mute before you proceed.
  • Eliminate one of the ink cartridges from its package. Be cautious to only touch the black plastic on the ink cartridge.
  • Eliminate the plastic tape.
  • Grip the ink cartridge by its sides with the nozzles near the printer, and then pull out the ink cartridge into its correct slot.
  • Attach the black ink cartridge into the right slot and the tri–color ink cartridge into the left slot.
  • Glide the new ink cartridge at a raised angle into the empty slot, and then softly push up on the ink cartridge until it locks into its place.
  • Recap these steps to mount the other ink cartridge.
  • Shut the ink cartridge access door.

Mount paper into the input tray

Mount plain paper in the input tray after you mount the ink cartridges.

  • Lift the input tray.
  • Slide the paper width guide as far out as possible to the left.
  • Mount a load of paper into the input tray with the print side facing you. Shove the stack into the tray until it rests.
  • Slide the paper-width guides to the right till they rest at the edge of the paper. Do not shove the guides in so strongly that they bend the paper.
  • Shut the output tray, and then tug out the output tray extender.
  • After mounting the paper, the printer mechanically prints an alignment page.

USB Printer Setup Windows & Mac

Step 1 : Concoct for the printer setup

Monitor the requirements and remove any previously installed printer versions from Windows to get organized for the USB connection setup and driver installation.

  • Check the following requirements and items before you start
  • The 123.HP.Com dj1112 printer is switched on.
  • Attain a USB cable not less than 3 m (9 ft 10 in) in length.
  • There is an obtainable USB port on your computer: If you link to a USB hub or docking station, the printer may not receive enough power to correctly function.
  • If you linked the USB cable to the computer before mounting the HP driver, proceed with these steps to eliminate the printer from the mounted devices to ensure a fruitful setup. Else, skip to the next step to mount the driver.
  • Detach the printer USB cable from the computer. Do not relink the cable until provoked during the driver installation step.
  • Look in Windows for ‘devices’, and then choose the Devices and Printerscontrol panel setting in the options.
  • Right-click the icon for your printer model, and then choose Remove device. If various icons occur for the printer, eliminate them all.
  • Shut the Devices and Printers window, and then proceed to the next step.

Step 2 : Mount the driver and install the connection

Windows

Download and mount the best obtainable printer driver to finish the USB connection.

  • Go to our website, type your printer model, and then track the onscreen instructions to install your driver. Liable to your printer model, the directed driver installation app HP Easy Start may install.
  • If a driver or 123.HP.Com dj1112 Easy Start downloads, track the on-screen orders to access the downloaded file to begin the setup. When impelled to select a connection type, choose USB. You do not need to finish the leftover steps in this section if the setup is fruitful.
  • If the download fails or your printer is not listed on our website, proceed with these steps to mount a driver from our website.
  • Go to our website, type your printer model if interrupted, and then check if the operating system version is precise.
  • Below Driver-Product Installation Software, choose Download next to the full feature driver, and then track the on-screen instructions to use the directed HP Download and Install Assistant or choose Download only to save and run the driver file from your computer.
  • When interrupted by the installer, choose USB to proceed with and complete the setup.

Mac

  • When provoked by the installer to select a printer connection option, choose USB.
  • On the Install screen, ensure HP Scan or HP Easy Scan is carefully chosen if your 123.HP.Com dj1112 printer has a scanner to permit full scan functionality.
  • When provoked by the installer, select Add Printer to generate a print queue on the Mac.
  • The Add window is accessible.
  • Choose the name of your HP Deskjet 1112 printer, tap the Use or Print Using menu, tap the name of your printer from the pop-up menu, and then select Add.
  • Get back to the HP installer to finish the installation.
HP Deskjet 1112 Setup

List of printing issues

  • Paper mismatch error for Windows & Mac
  • Incompatible ink cartridges
  • Printer is offline
  • Color or black ink not printing
  • Print job stuck in print queue for Windows & Mac
  • Slow printing for windows & mac
  • Fixing print quality problems
  • Ink alert or low on ink message displays
  • The power button light blinks (paper jam)
  • Resetting the printing system for windows & mac

Printing Both Sides of the Paper (Windows) (Duplexing)

Print on both sides of the paper

  • To evade page ordering issues, mount enough blank paper into the input tray to fully finish your print job.
  • Access the document that you want to print, select File, then tap Print.
  • Choose the name of your printer, then select Printer Properties or Preferences, or Printer Setup, liable to what is displayed.
  • The Document Properties or Printing Preferences window exposes.
  • If a Printing shortcuts tab is obtainable, choose the Print on Both Sides or Two-sided (Duplex) Printing option, if existing.
  • If a Printing Shortcut tab or a duplexing shortcut is not available, select the LayoutFeatures, or Finishing tab, liable to which tab exhibits in your driver version.
  • Find the Print on Both Sides or Two-sided printing menu or option, then choose the binding or page flip option to read like a booklet or a tablet.
  • Select OK, then choose Print.
  • Eliminate the printed first side pages from the output tray, then place the load on a flat surface to line up the pages.
  • Mount the printed first side pages into the main input tray. How you load the pages depends on whether you have a back load input tray or an anterior load input tray.
  • For most rear loading printers, turn the pages so that the printed side is facing down, and mount the bottom short edge into the 123.HP.Com dj1112 printer.
  • For most front loading printers, load the pile printed side facing up (Inkjets) or facing down (Laser Jets)with the bottom edge into the printer or the top edge into the printer.
  • Choose Continue.
  • The alternate side of the pages print.

Printing on Both Sides of the Paper (Mac) (Duplexing)

Step 1 : Print the first side of your pages

  • To evade page ordering disputes, mount enough blank paper into the input tray to fully finish your print job.
  • Access the document that you want to print, select File, then choose Print.
  • If no settings exhibit, select Show Details.
  • Choose the name of your printer in the Printer
  • Choose Paper Handling from the anonymous menu in the middle of the window.
  • From the Pages to Print menu, choose Odd Only.
  • Reliant to your printer type, choose one of the following settings from the Page Order options
  • Back Loading paper tray: Choose Automatic
  • Anterior loading paper tray: Choose Reverse
  • Select Print.
  • When all the pages are printed, eliminate any leftover unprinted paper from the input tray, then proceed to the next step.

Step 2 : Print the former side of your pages

To print the former side, remount the printed pages into the input tray, then fix the pages to print in the document print settings. Read one of the following sections, liable to your 123.HP.Com dj1112 printer type.

Loading paper from anterior and back of the input tray

To print the other side, decide if you want to read the document like a booklet or like a tablet, reload the pages in the input tray, then set up the print job in the software.

  • Select if you want to read the two-sided document like a booklet or like a tablet .
  • Eliminate the first side pages from the output tray, choose the load on a flat surface to line up the pages, then mount them into the input tray.
  • For booklet reading, turn over the pages so that the printed side is facing down, and mount them top edge down.
  • For tablet reading, turn over the pages so that the printed side is facing down, and mount them top edge up.
  • Arrive at the Print menu in the document, then choose Even Only from the Pages to Print menu.
  • Choose Automatic from the Page Order
  • Select Print.

Loading paper in the input tray anterior

  • Select Normal from the Page Order
  • Click Print.

‘Incompatible Ink Cartridge’ or ‘Ink Cartridges Missing’ Error Displays

After you mount an ink cartridge, an ‘Incompatible Ink Cartridge’ or ‘Ink Cartridges Missing’ error message exhibits on the computer screen and the Power button light flashes.

Step 1 : Ensure that the ink cartridges are well-matched

Before you start, ensure that the ink cartridges are well-matched with your 123.HP.Com dj1112 printer.Visit our website to monitor ink or toner cartridge compatibility or purchase replacement cartridges and other supplies.

  • Go to our website.
  • Track the on-screen instructions to order new supplies or monitor cartridge compatibility with your printer.

You can also buy genuine HP cartridges and supplies from other sellers.If mounting HP ink cartridges resolute the issue, and the printer does not exhibit an ink cartridge error, you do not need to proceed to troubleshoot.

Step 2 : Eliminate, inspect, and then replace the ink cartridges

The printer might exhibit an error if the ink cartridges are not properly installed.

  • Switch on the power button of the 123.HP.Com dj1112 printer.
  • Shut the output tray.
  • Reach inside the printer, grip the handle, and then shut the ink cartridge access door.
  • The carriage moves to the middle of the printer.
  • Wait until the carriage is silent before you proceed.
  • Slightly press down on the ink cartridge to discharge it, and then tug the ink cartridge out of its place.
  • Examine the contacts for any protective tape that still might be on the nozzles.
  • Eliminate the protective tape from the contacts, if required.
  • Grip the ink cartridge by its sides with the nozzles toward the printer, and then inset the ink cartridge into its precise slot.
  • Attach the black ink cartridge into the right slot and tri-color into the left slot.
  • Glide the ink cartridge at a marginally upward angle into the empty slot, and then gently shove up on the ink cartridge until it locks into place.
  • Recap these steps to mount the other ink cartridge, if required.
  • Shove the ink cartridge access door.

Step 4 : Eliminate and then reinsert the ink cartridges again

Recap the steps that you performed earlier in this document to eliminate and then reinsert the ink cartridges.

Step 5 : Wipe the ink cartridge contacts again

Swiping the ink cartridge contacts again can help resolve the issue. Recap the steps that you executed earlier in this document to wipe the contacts of the ink cartridges.

Step 3 : Wipe the electrical contacts

The printer might exhibit an ink cartridge error if the ink cartridge contacts are unclean.

  • Collect the following materials:
  • Dry foam rubber swabs, lint-free cloth, or any soft material and distilled, filtered or bottled water must be used.
  • Switch the power button on of the printer.
  • Shut the output tray.
  • Reach inside the printer, grip the handle, and then shut the ink cartridge access door.
  • The carriage moves to the middle of the 123.HP.Com dj1112 printer.
  • Wait until the printer is mute before you proceed.
  • Separate the power cord from the back of the printer.
  • Detach the USB cable.
  • Press down on the ink cartridge to release it, and then tug the ink cartridge out to eliminate it from its place.
  • Grip the ink cartridge by its sides.
  • Examine the contacts for ink and debris accumulation.
  • Wipe the contacts with a dry swab till no debris remains on them.
  • Wipe only the copper-colored contacts, and then let the ink cartridge dry for roughly 10 minutes.
  • Grip the ink cartridge by its sides with the nozzles near the printer, and then reinsert the ink cartridge into its precise place.
  • Glide the ink cartridge at a slight mounting angle into the blank slot, and then softly shove the ink cartridge until it locks into place.
  • Shove the ink cartridge forward into its slot until it locks into place.
  • Recap these steps to clean and then reinsert the other ink cartridge.
  • Shut the ink cartridge access door.
  • Relink the power cord to the back of the printer.
  • Relink the USB cable.
  • Switch on the power button of the printer, if it does not turn on mechanically.
  • If the error perceives, go to the next step.

Step 6 : Reorganize the printer

Rebooting the printer can sometimes resolute an ink cartridge error.

  • Switch on the 123.HP.Com dj1112 printer.
  • With the printer switched on, detach the power cord from the back of the printer.
  • Unplug the power cord from the wall outlet.
  • Link the power cord back into the wall socket.
  • Relink the power cord to the back of the printer.
  • Switch on the printer, if it does not mechanically switch on.
  • If the error continues, go to the next step.

Step 8 : Check the printer

If the prior steps did not resolute the ink cartridge error, check the printer.

123 HP Deskjet 1112 Setup

Step 7 : Substitute the ink cartridge with a new ink cartridge

Substitute one or both ink cartridges.

  • Switch on the power button to turn on the 123.HP.Com dj1112  printer.
  • Shut the output tray.
  • Reach inside the printer, grasp the handle, lower the ink cartridge access door.
  • The carriage moves to the middle of the HP Deskjet 1112 printer.
  • Slightly press down on the ink cartridge to discharge it.
  • Tug one ink cartridge toward you out of its place.
  • Eliminate the new ink cartridge from its package. Be cautious to only touch the black plastic on the ink cartridge.
  • Eliminate the plastic tape.
  • Grip the ink cartridge by its sides with the nozzles near the printer, then inset the ink cartridge into its precise slot.
  • Attach the black ink cartridge into the right slot and the tri-color cartridge into the left
  • Glide the ink cartridge at a marginally upward angle into the empty slot, then moderately shove the ink cartridge until it locks into place.
  • Recap these steps to mount the other ink cartridge, if required.
  • Shut the ink cartridge access door.

‘Paper Mismatch’ Error (Windows)

Step 1 : Alter the paper size setting

Paper Mismatch or Paper Size Disparity

  • Ensure your 123.HP.Com dj1112 printer is in the Name or Printers drop-down list box, and then choose PropertiesPrinter Properties or Preferences.
  • Tap the Paper/Quality
  • Select Advanced, if necessary, and then choose Paper Size.
  • Choose the paper size that equals the size and type of paper mounted in the printer tray, and then tap OK. If there are no matching paper sizes, select the size from the list that is closest to the size of the paper loaded in the tray.
  • Select OK, and then attempt to print.
  • If the issue continues, go to the next step.

Step 2 : Check the paper source setting

Eliminate and load the paper again in the input trays, and then check the paper source setting.

  • Eliminate all the paper from all the 123.HP.Com dj1112 printer input trays.
  • Remount the paper, and then alter the paper width guides so they softly rest against the edge of the paper load.
  • In the program you want to print from, select File, and then tap Print.
  • Ensure your printer is in the Name or Printers drop-down list box, and then select PropertiesPrinter Properties or Preferences.
  • Select the Paper/Quality tab, and then choose Paper Source to tap the correct tray.
  • Select OK, and then attempt to print.
  • If the issue continues, go to the next step.

‘Paper Mismatch’ Error (Mac)

When printing photos, documents, or envelopes, one of the following error messages exhibits:

Step 1 : Alter the paper size setting

Monitor the paper size setting to ensure it matches the paper type you want to print on.

  • In the program you want to print from, choose File, and then select Print.
  • Choose your printer from the Printer drop-down menu.
  • Select Page Setup, and then choose Paper Size.
  • Choose the paper size that equals the size and type of paper mounted in the printer tray, and then select OK. If there are no corresponding paper sizes, choose the size from the list that is nearest to the size of the paper mounted in the tray.
  • Attempt to print.
  • If the issue exists, go to the next step.

Step 2 : Reorganize the printer—–Windows & Mac

  • Switch on the 123.HP.Com dj1112 printer.
  • With the printer Switched on, detach the power cord from the back of the printer.
  • Release the power cord from the wall socket.
  • Plug the power cord back into the wall socket.
  • Relink the power cord to the back of the printer.
  • Switch on the printer, if it does not mechanically turn on.
  • If the issue continues, go to the next step.

Step 3 : Upgrade the driver

AirPrint drivers may not support printing on diverse paper sizes. To upgrade the driver, eliminate your printer from the printer list, and then select the printer with the HP print driver.

  • Choose the Apple menu, and then select System Preferences.
  • Liable to your operating system version, select Print & FaxPrint & Scan, or Printers & Scanners.
  • Choose the name of your printer, select the minus sign , and then remove the printer.
  • Choose the plus sign , and then select  Add Printer or Scanner.
  • Choose the Useor Print Using box, and then add the name of your printer in the pop-up menu.
  • Do not choose AirPrint.
  • Select Add to add the printer to the list.
  • Reboot the Mac.
  • Attempt to print.
  • If the issue continues, go to the next step.

Step 4 : Monitor the paper source setting

Eliminate and restock the paper in the input trays, and then examine the paper source setting.

  • Eliminate all the paper from all the printer input trays.
  • Remount the paper, and then alter the paper width guides so they softly rest against the edge of the paper stack.
  • In the program you want to print from, open the desired document, select File, and then choose Print.
  • Choose your printer from the Printer drop-down list.
  • Click the Paper Type/Quality or Media & Quality
  • Choose Feed from or Source to tap the correct paper tray.
  • Attempt to print.

Step 5 : Upgrade the firmware

  • Ensure the printer is on and linked to the computer, either through your local network or a USB cable.
  • Go to our website, and then type your printer model number.
  • Choose your operating system, if essential.
  • Select Firmware, and then tap Download.
  • If a Firmware section is not recorded, an update is not presently obtainable for your printer.
  • Select Use HP Download and Install Assistant (Recommended), click Next, and then tap Install now.
  • When the HP Deskjet 1112 Printer Update window exhibits, see if the printer serial number displays.
  • If the serial number displays, choose the checkbox next to it, and then select Update.
  • If the serial number displays but the status is ‘not applicable’ (grayed out), you do not need to finish the firmware update. Select Cancel.
  • If the serial number does not show and your printer uses a network connection, link a USB cable to the printer and computer, pause for 20 seconds, and then select Refresh. When the serial number shows, choose the checkbox next to it, and then select Update.
  • When the upgrade completes, select OK.
  • If you linked a USB cable to upgrade your network printer, eliminate the USB driver installed by Windows.
  • Look in Windows for Devices and Printers, and then select Devices and Printersin the list of options.
  • Right-click the USB printer device that corresponds to your printer model, and then chooseRemove Device.
  • Separate the USB cable from the 123.HP.Com dj1112 printer and the computer, and then reboot the computer.

Disclaimer

123hp.co is an independent website that provides support information for HP printer issues. The website does not have specific association with “HP” or its services. All information and images furnished on this website are for informational purpose only. We do not sell products or services of HP in any form. We do not provide any warranty or services associated with the manufacturer. You should approach the manufacturer for the same. Users are advised to review our privacy policy before using our website.