hp-officejet-2627-setup

HP OfficeJet 2627 Mobile All-in-One Printer

Printer Features

The 123.HP.Com Oj2627 Mobile printer is designed to print, scan and copy from anywhere nearer to this all-in-one portable device. This device fits in every compact place and convenient for printing. It is easy to setup this printer on both computer and mobile devices. This mobile printer comes with a long-lasting battery and original HP ink cartridges.

Printer Specifications

The HP Officejet 2627 Mobile All-in-One printer has been designed with mobile professionals in mind. It is adept and provides easy color printing from laptops, smartphones, and tablets.

  1. The All-in-One printer measures 10.6x15x15.8 inches unfolded and a color touchscreen of 2.7-inch and weighs 6.7 lbs.
  2. There is an HP PCL 3 GUI print driver and HP ePrint for mobile printing.
  3. The new printer system connects via Wi-Fi and through USB connectivity and Wi-Fi direct.
  4. The printer has a 10-page automatic document feeder along with a printing ability of 10 (black) / 7 (color) ppm.
hp officejet 2627 setup

Pros

  • Light & Compact
  • Fast & Easy Mobile Printing
  • Good quality of print, scan & copy
  • Rechargeable & Swappable battery

Cons

  • Two-tank ink cartridges
  • High per-page operational cost
  • Heavier than most Laptops
  • No Auto-duplexing

Bottom Line

An AiO printer that has enhanced mobile printing on-the-go for your comfort. Designed light and compact to print, copy and scan from wherever you are.

123.HP.Com Oj2627 – First Time Printer Setup

Step 1: Remove the printer from the Package

  • Remove the HP Officejet 2627 printer from the box and remove all tapes and packing materials from the outside of the printer.
  • Lift the top cover and remove the tape. On the printer control panel, remove the film.
  • Open the ink cartridge access door to remove all the tapes and packing materials and close the door. Discard or recycle the packing materials.

Step 2: Insert the Battery

  • Turn the printer in such a way that the rear of the 123.HP.Com Oj2627 printer faces you. Push the battery cover latch towards the right and pull it out.
  • From the box, remove the rechargeable battery that comes along with the printer and unwrap it.
  • Into the battery slot, slide in the battery and press the left side until it locks into place. Then, close the slot.

Step 3: Connect the Power Cord and set the Preferences

  • Connect one end of the power cord to the rear of the printer and the other end to the wall outlet.
  • On the printer control panel, press the power button to turn on the printer. To view the control panel, press the top of the panel.
  • Press the arrow buttons on the printer control panel to select your preferred language and region. Then, press Confirm.

Step 4: Load Paper into the Input Tray

  • Open the top cover of the printer and then, pull up the input tray extender.
  • Before you load plain sheets into the paper tray, slide out the paper width guides as far as possible.
  • Place the plain sheets into the paper tray and then, slide in the paper width guides until they rest against the sides of the paper.

Step 5: Install the Ink Cartridges

  • First, open the ink cartridge access door and wait until the carriage is idle and silent before you proceed.
  • Remove the tape and the plastic tape on the ink cartridge carefully. Make sure you touch the black plastic on the ink cartridge.
  • From the ink cartridge, remove the plastic tape. Also, make sure you do not touch the copper-colored contact or the ink nozzles on the cartridge.
  • Now, insert the ink cartridge into the slot and press it until it latches into place.
  • Make sure you install the black ink cartridge on the right and the color ink cartridge on the left of the ink cartridges slots and close the latch.
  • After closing the ink cartridge access door, the printer will automatically print an alignment page.
  • If the 123.HP.Com Oj2627 printer did not automatically align the ink cartridge, align from the printer’s control panel.
  • Swipe down on the home screen to the Dashboard and then, touch the Setup icon.
  • Scroll down and touch Printer Maintenance -> Align Printer and then, touch Continue.
  • Now, the alignment page prints.

Step 6: Install the printer software

The 123.HP.Com Oj2627 printer hardware is setup completely. Now, install the printing software. Make sure you do not connect the computer to the printer until the printing software prompts.

Installation of Printer Driver and Software

  • Make sure the printer is turned ON.
  • Make sure you disconnect any USB cables connected between the computer and the printer.
  • Open a web browser on your computer and go to our website.
  • Click on the Software and Drivers tab and type the printer model in the search field.
  • Click to select HP OfficeJet 2627 from the list of results.
  • Check if the page identifies your Operating system. If not, click Edit and choose the operating system of your computer and click Update.
  • Click Download a full-featured version of the software. Choose Use HP Download and Install Assistance and click Next.
  • Follow the on-screen instructions to setup the software.
  • When prompted to select the type of connection, choose any of the connection types.
  • Now, follow the on-screen instructions to connect the printer.

Disclaimer

123hp.co is an independent website that provides support information for HP printer issues. The website does not have specific association with “HP” or its services. All information and images furnished on this website are for informational purpose only. We do not sell products or services of HP in any form. We do not provide any warranty or services associated with the manufacturer. You should approach the manufacturer for the same. Users are advised to review our privacy policy before using our website.

Was This Page Informative?
[Total: 0 Average: 0]